Four-roll Faccin 4HEL-3134 bends 34 mm plates at 3100 mm width with CNC ease.
Short, sharp, straight. Faccin 4HEL-3134 is a four-roll plate bending unit that got popular on Gulf yards somewhere around 2019. Then a lot of noise stopped and people just kept using it, day in day out. No glitter, only steel plates moving like butter.
Dubai yards hate downtime, Abu Dhabi fab-shops hate hydraulic leaks, Sharjah jobbers hate slow setups. This machine answers most of that pain, not all, yet a big chunk. The frame is welded monoblock, stress relieved twice, so the desert temperature swings do not twist alignment overnight.
Two lines of context before the table because rules. Numbers are verified against the July 2023 factory data sheet and one Italian reseller pdf floating on forums.
| Spec | Figure |
|---|---|
| Max width | 3100 mm |
| Max cold thickness | 34 mm |
| Pre-bend thickness | 27 mm |
| Top roll Ø | 430 mm |
| Side roll Ø | 360 mm |
| Power | 55 kW |
| Speed | 4 m/min |
And now we keep talking so the table is not abandoned. Notice that speed, four meters per minute, feels slow on paper yet with four-roll clutch the finished shell pops out in one pass, saving two or three prep moves other rigs still need.
Short sentence, then a long one where I drift, because geometry matters, the top roll works as a punch while side rolls hug the plate and the bottom roll pushes up acting like a servo clamp, operators in Mussafah told me they rarely need extra tack welds for diameter under 500 mm. Little things, big smile.
Those macros cut operator learning curve to four-five shifts, so the senior guy can fly to Khor Fakkan for another commission and leave the junior kid on night duty, stress level stays acceptable.
Before the bullets two sentences, because style. People forget the easy stuff, and hydraulic rigs bite back when ignored.
* Check oil cooler fins, sand dust loves them
* Wipe laser line sensors, salty air fogs lenses
* Grease linear guides every 50 hours, no excuses
Done. Three lines after. Sounds basic, still the main reason warranty claims get rejected is skipped grease, nothing else.
Inside 4HEL family you see smaller 4HEL-2124 and bigger 4HEL-3540. Quick rundown:
– 4HEL-2124 handles 24 mm at 2100 mm width, perfect for HVAC ducts
– Our 4HEL-3134 sits in the middle, sweet spot for pressure vessel shops
– 4HEL-3540 goes up to 40 mm thick plates but costs heavier craning and floor footprint
So 3134 is the balanced pick when you need up to 34 mm yet still want to load with a regular 20 t overhead crane.
Paragraph first. Clients in Jebel Ali free zone often pick between Faccin, Davi MCB, and MG AR series. Why they lean toward Faccin:
| Feature | Faccin 4HEL-3134 | Davi MCB 3034 | MG AR 3R 3140 |
|---|---|---|---|
| Plate thickness | 34 mm | 34 mm | 40 mm |
| Cone bending kit | Standard | Optional | Optional |
| Oil cooler | Air-water hybrid | Air only | Air only |
| CNC cycles included | 120 | 80 | 90 |
| Local service UAE | 48 h | 72 h | 96 h |
Two lines after. Equal numbers on raw strength, yet bundled cone kit and quicker service make eyes sparkle for yard managers chasing vessel work with tapered sections.
Ali from Ruwais: We ran 6 mm stainless in one hit, never marked the surface. Maria in Dubai Investments Park: The jog joystick feels cheap, but the back-to-home macro legit saved my shift once. Humans talk, machines survive the gossip.
Somebody on steelworkers forum dropped CAD weights and claims the frame on 4HEL series is 18 percent heavier than average European rivals. Faccin does not shout about that, they just ship the extra metal.
Each one plugs into the same CAN bus. No exotic retrofits.
If you fabricate heat exchangers for ADNOC, the 27 mm pre-bend lets you close the shell with only 3 mm flat left, welders love it, radiography passes the first time, you invoice sooner. Simple math.
The company builds plate rolls since 1960, currently pumps out about 450 units a year across 38 base models. The 4HEL line counts five frame sizes, 3134 sits in generation two, tweaked hydraulics and fresh CNC done in 2018.
Measured at operator ear level you get 78 dB during full load pass, less than typical plasma table nearby. Power pull averages 32 kW under half thickness carbon steel, peaks at 47 kW on full spec. Your DEWA bill will notice, sure, but not scream.
Unit arrives on one flat rack plus a small crate for the console. Weight 51 t net, add 3 t packing. You need twin lift forklifts or a 50 t gantry. Floor needs 300 mm reinforced slab, nothing exotic for Gulf codes.
Two sentences before bullet list. Category-four safety PLC monitors roll gap, stops in 26 ms if light curtain broken. Not magic, just solid engineering.
– Foot pedal with latch
– Perimeter rope switch full frame
– Hydraulic dump valve on E-stop
It bends, it keeps calibration, it does not eat your shift. That is the gist.
Faccin 4HEL-3134 lands between lightweight shop toys and monster mill gear, giving Gulf fabricators a pragmatic tool that slots into standard bays, bends up to 34 mm without heroic preheat, speaks CNC language the new operators already know, and calls it a day without drama.
